Can We Solve Your Storage Heater Problems?

● Far too expensive to run
● Lack of control
● Heat when not wanted
● No heat when wanted
● Expensive “standard“ electricity
● Often positioned in wrong place

Benefits of our German Heaters v Storage Heating

● Lower Power Consumption … Our heaters can use as little as 50% of the power required by storage heaters to heat a given room size.  eg 3.4 kW storage heater (any storage heater 1021mm long), our heating usually only needs 1.5 or 2.0kW. =LESS WASTE

● Controllability …. Storage heaters usually give most of their heat in the morning, (some give additional boosts during the day) , our heaters just supply the heat when you need it. =LESS WASTE

●  Response… Storage heaters do not respond to weather, our heaters if a warm day will not come on saving even more on energy. =LESS WASTE

● Alternative  Heat Sources ….if you have an additional heat source such as an open fire, our heaters will switch off when the room  temperature rises above the thermostat set temperature. =LESS WASTE

● Radiant Heat ….Storage heaters produce mainly convected heat which rises to the ceiling, often giving a marked temperature difference between floor and ceiling. Our heaters produce radiant heat  as well as some convected which gives a cosier all round heat  in the room with less draughts at floor level. =LESS WASTE

● Timer Control…. Use of a timer along with thermostat ensures heat is only produced when required. There is no point heating a living room all day if the occupier is away working. Timer ensures heat and energy is not wasted and the heater can be set to come on an hour or so before the occupant gets home. = LESS WASTE